ELM327 WiFi OBD2 Car Diagnostic Tool Scanner (Android, iOS, Windows) – (*Discontinued*)

ELM327 OBD2 WiFi Auto Diagnostic Scanner & Adapter:

• WiFi diagnostic tool scanner CAN bus interface OBD 2 for Android, iOS and PC.
• This diagnostic tool allows you to read the engine control unit to analyze vehicle memory.
• It wirelessly transmits all electronic vehicle data to your smartphone, tablet or laptop.
• As a result, you can comfortably read all important electronic vehicle data (such as load values, coolant temperature, air temperature, exhaust gas values, tank status, etc).
• Diagnostic tools are available for all vehicles in the year of construction in 1996, and gasoline engines after 2001 have OBD2 / EOBD / JOBD interfaces.
• Automatic detection of OBD-II logs.
• Suitable for Android, iOS, PC system. Easy WiFi connection.
• Your PC/ laptop must have a WiFi adapter or module.

Main Features: 

• No other tools are required.
• Suitable for CAN-BUS vehicles.
• Connect directly to your PC/ laptop via WiFi.
• All car electronics data on a smartphone, tablet or PC.
• OBD 2 16-pin plug-in system, no additional plugs required.
•  Read and delete the diagnostic error code.
• Read motor data and sensor data in real-time.
• Compatible with Android, iOS devices and PCs.

Technical Data: 

• Housing: Plastic
• Colour: Black
• 12V power supply (via diagnostic interface) to control LED
• 1 OBD 2 16-pin standard plug

Support OBD2 Protocol: 

• SAE J1850 PWM (41.6 kbaud)
• SAE J1850 VPW (10.4 kbaud)
• ISO 9141-2 (5 baud initialization, 10.4 kbaud)
• ISO 14230-4 KWP (5 baud initialization, 10.4 kbaud)
• ISO 14230-4 KWP (fast initialization, 10.4 kbaud)
• ISO 15765-4 CAN (11-bit ID, 500 kbaud)
• ISO 15765-4 CAN (29-bit ID, 500 kbaud)
• ISO 15765-4 CAN (11-bit ID, 250 kbaud)
• ISO 15765-4 CAN (29-bit ID, 250 kbaud)

Applicable to all vehicles in the year of construction in 1996, gasoline 200-1, for example:

[table id=4 /]

Allows you to read the following data:

Engine speed, calculated load value, vehicle speed, fuel system status, intake air temperature, fuel pressure, coolant temperature, short-term and long-term fuel trimming, sensor data and display.

Connection instructions between the connection adapter and the WiFi device:

1. Turn on WiFi on your phone or PC (visibility, search function)
2. Insert the diagnostic device into the OBD socket
3. Turn on the ignition switch
4. Allow pairing
5. Connect the selected program (such as Incardoc)

Please Note: 

Recommended Apps:

• iOS Apps
• Android Apps
• (assume PC works with the driver) (but should link to the driver as well digitally or upload it)

Important Info:

• Recommended for mobile phones.
• Vehicle dependent/ specific.
• Gives error codes ONLY, no descriptions.
• ONLY reads engine codes.

Contents: 

1 x ELM 327 WiFi Interface
1 x Mini CD-ROM